My Jeep Says ‘Auto Park Engaged’ -What Does It Mean?
Auto Park is the advanced safety feature that ensures your Jeep remains securely parked in various situations. But all things become so annoying when the Auto Park Engaged message pops up on the display. But what does it mean?
The message “Auto Park Engaged” on a Jeep means that the vehicle’s Auto Park feature is engaged. Your Jeep’s auto park might engage if it’s not in park, your seat belt is unbuckled, the driver’s door is open, the brake pedal isn’t pressed, and your speed is 1.2 miles per hour or less.
However, that’s just a hint about the whole matter. To clarify and to understand the whole thing we have brought about a comprehensive guide. Keep reading.
Key Takeaways:
- Auto Park enhances safety by automatically engaging the parking brake, especially on slopes or uneven terrain.
- To enable Auto Park, ensure the vehicle is in Park, speed is 1.2 MPH or less, seat belt is buckled, door is closed, and brake pedal is depressed.
- If “Auto Park Not Engaged” appears, check the battery or seek professional diagnostic assistance for potential faults.
What Is An Auto Park Of Jeeps And How Does It Work?
Auto Park is a safety feature found in Chrysler 300, Dodge Charger, and Jeep Grand Cherokee vehicles. It’s designed to automatically engage the parking brake when the transmission is in Park and the engine is turned off.
This helps prevent the vehicle from rolling away unintentionally. Essentially, it adds an extra layer of security to your parking routine, giving you peace of mind knowing your Jeep is securely parked.
The Auto Park feature in Jeeps functions by automatically engaging the parking brake when specific conditions are met:
- the engine is turned off,
- the transmission is shifted into Park, and
- certain safety parameters like seat belt and door status are met.
This ensures the vehicle remains stationary, minimizing the risk of unintended movement, particularly on slopes or uneven terrain.
What Does It Mean When My Jeep Says ‘Auto Park Engaged’?’
When your Jeep displays a message saying “Auto Park Engaged,” it typically means that the automatic parking feature has been activated.
This feature assists you in parking your vehicle by automatically controlling the steering and/or braking to help you maneuver into a parking space.
It’s designed to make parking easier and more convenient, especially in tight spaces or difficult situations.
If your Jeep has this feature, it’s important to follow the prompts and monitor the surroundings while the auto park is engaged to ensure safe operation.
When Does The ‘Auto Park engaged’ Messages Displayed In The Display Of Jeeps?
The message “Auto Park Engaged Press Brake + Push Button to Shift to Gear” will display in the Electronic Vehicle Information Center (EVIC) in the following conditions only.
1# When the vehicle is not in PARK mode:
When the vehicle is not in PARK mode, the “Auto Park engaged” message won’t display. This indicates that the parking brake won’t activate until you shift the transmission into PARK.
It’s a safety measure to ensure that the parking brake engages only when the vehicle is securely parked in the proper gear, minimizing the risk of unintended movement.
2# When the vehicle speed is 1.2 MPH or less:
This message appears when the vehicle is moving slowly or has come to a complete stop, signaling that the auto park feature is ready to engage the parking brake.
3# When the driver’s seat belt is unbuckled:
If the driver’s seat belt is unbuckled, the “Auto Park engaged” message may be displayed. This serves as a reminder to buckle up before the parking brake engages.
It’s a safety feature to encourage the driver to wear their seat belt, enhancing overall safety while operating the vehicle and during parking maneuvers.
4# When the driver’s door is ajar:
When the driver’s door is ajar, the “Auto Park engaged” message may appear on the display. This is a signal that the door needs to be fully closed before the auto park feature activates.
Ensuring the door is securely shut before engaging the parking brake prevents any risks of the vehicle rolling away unintentionally, promoting safety during parking.
5# When the brake pedal is not depressed:
When the brake pedal is not pressed, the “Auto Park engaged” message may display. This indicates that the parking brake won’t activate until you apply the brake.
It’s designed to ensure the vehicle comes to a complete stop before engaging the parking brake
What To Do When The Message Appears?
Now as you know when the message pops up on the screen, fixing it is very easy. Just take care of the things that are causing the problem.
1# Ensure the vehicle is in PARK mode: Shift the transmission into PARK to allow the auto park feature to engage the parking brake.
2# Confirm the vehicle speed is 1.2 MPH or less: If the vehicle is moving, slow down or come to a complete stop to enable the auto park feature to activate.
3# Buckle the driver’s seat belt: Fasten your seat belt to satisfy the safety requirements for the auto park feature to engage.
4# Close the driver’s door: Make sure the driver’s door is fully closed to prevent any interference with the auto park activation.
5# Depress the brake pedal: Apply the brake pedal to indicate that the vehicle is at a complete stop, allowing the auto park feature to engage safely.
What Does It Mean When The Jeep Says ‘Auto Park Not Engaged’?
When your Jeep displays the message “Auto Park Not Engaged,” it means that-
- Your vehicle isn’t in PARK
- Your Driver’s Door is ajar
The message “Auto Park Not Engaged” will pop up in the EVIC. A warning chime will persist until you shift to PARK or close the Driver’s Door.
If that is not the case, it could indicate several issues, often linked to low voltage in the vehicle’s battery.
If the vehicle wasn’t shifted to Park and was left unattended, it might drain the battery, preventing the engine from starting.
This low voltage can also trigger false warning messages. First, try jump-starting or recharging the battery.
If the issue persists, it might suggest a fault detected by one of the vehicle’s computers, preventing the engine from starting.
To diagnose the specific problem, you’ll need a compatible scan tool to read fault codes stored in the vehicle’s computers.
A professional scan can cost around $200 and will help pinpoint the faulty component for repair or replacement, with costs varying depending on the specific issue.
How Do I Turn Auto Park Off On My Jeep?
Well, if you want you can also turn off the auto park features in your jeep in order to manually control the parking brake. To turn off Auto Park on your Jeep, follow these steps:
- Step 1: Start by ensuring the vehicle is in Park and the engine is running.
- Step 2: Locate the Auto Park button on the dashboard or center console. It’s typically labeled as “Auto Park” or “Park Assist.”
- Step 3: Press and hold the Auto Park button for a few seconds until you see a message confirming that Auto Park has been turned off.
- Step 4: Once you receive the confirmation message, release the button.
Now, Auto Park should be disabled on your Jeep, allowing you to manually control the parking brake without automatic engagement. Keep in mind that re-enabling Auto Park may require repeating these steps in reverse.
FAQs
Here we have covered some of the mostly asked queries of the jeep owners about the auto park. You should check out the queries to know more or to clarify things.
What is Auto Park functionality?
Auto Park functionality automatically engages the parking brake when the engine is turned off and the transmission is in Park. It enhances safety by preventing unintentional vehicle movement, especially on slopes or uneven terrain, providing peace of mind while parking.
How do I turn off the auto park brake on my Jeep Compass?
To turn off the auto park brake on your Jeep Compass, access the vehicle settings, navigate to the Brakes section, and select Auto Park Brake. Then, choose the option to turn it Off. This disables the auto park feature, giving you manual control over the parking brake.
How do you trigger Auto Park?
To trigger Auto Park, release the steering wheel, shift your Model S into Reverse, and touch “Start Autopark” on the touchscreen. Once initiated, Autopark will maneuver the vehicle into a parking spot autonomously and display a message when parking is complete.
Final Words
Auto Park is a valuable safety feature found in select Chrysler, Dodge, and Jeep vehicles. It engages the parking brake automatically, enhancing safety while parking on slopes or uneven terrain. To disable Auto Park, access vehicle settings and turn off the feature.
Additionally, triggering Auto Park in vehicles like the Tesla Model S involves releasing the steering wheel, shifting into Reverse, and activating Autopark on the touchscreen.
Remember, always prioritize safety by ensuring the vehicle is in Park before exiting, and regularly maintain your vehicle’s battery to avoid issues with Auto Park functionality.
